TireSmoke.org

YOU´RE RIGHT..

I´m going on vacations next Wednesday...for the moment I close the priority...maybe back from the beach I have a clearer mind!

Thank you very much!!!

I will keep posting for sure

You guys are the best

Regards

I am wondering to know if, with this conversion I can get a 100% proper idle. Maybe I am swimming agaist the waves!

Not at all.

I will take a look at it.

The carb is supposed to came from a 205 model.

Mr. Maverick

Lets do as we said in Cuba, "let us go by parts, like Jack the ripper" (just joking)

YOUR COMMENT***When you say the exhaust smells like a lot of gasoline, we know that the idle mixture has too much fuel. This might be caused by fuel getting into the idle air stream by some path other ...

Short and clear...

This has nothing to do with uneven idle.

Keep looking

Can you please explain me this

" Fast idle setting
- With the carburettor removed, invert it then pull the choke lever fully on.
- Using a twist drill, check that the gap between the throttle valve and barrel is 0.8 mm. If not, turn the adjustment screw."

I have never checked this out...

I have ...

Jajajaja, good for you!

This is not the carburator I have on the 206...maybe there are variants of the 205 model Solex.

Perfect!

Oh yes, you are right, the choke is full open.

Pictures shared

https://drive.google.com/file/d/0B4HiWnTEKS8QYjBLVU04TnZzMUk/view?usp=sharing

https://drive.google.com/open?id=0B4HiWnTEKS8QLWhsc3FJM2Mtenc

https://drive.google.com/open?id=0B4HiWnTEKS8QQzZDZEVyVFJmNW8

https://drive.google.com/open?id=0B4HiWnTEKS8QNzRIWk1DVTdzanc

https://drive ...

It smells like if I was droped into a gasoline tank from top to button.

Sorry maybe I didn't explain well about the idle screw.

The carb has a screw to adjust the idle. It adjust air and it is fitted at around 2.5 turns out. But I am refering to the idle JET.

It MUST be totally screwed in but I noticed that screwing it out a little amout I obtain a better idle.

Maybe ...

You shoot two interesting questions.

The first one.

If you are refering to the distributor's position I can say it is correct. It has an almost 30 degrees free movement you can access by releasing two nuts. I have moved it all the way. Now it is fitted in the best position.

If you are refering to ...

Good question!

Unfortunately after setting a 205 head on a 206 model things changed. Things that goes beyond my control.

For example:

Is the combustion chamber the same? More or less compression?
Is the valve timming the same? The intake has been advanced or retarded?
Is the head of the piston in ...

So know that you have some material, I will try to focues on poor idle.

I did dismantle and clean up every tiny little peace of the carb so it is very clean.

I tried it without air filter and with it.

I also disconnect the electric fuel pump on the gas tank because this head has a mecanical pump ...