Page 1 of 1
Canfield Swap Meet
Posted: Mon Jul 11, 2022 11:04 pm
by Fred32v
Dave & Ed's Canfield Swap Meet is this Friday 15th , Saturday 16th, and Sunday 17th.
At this point, Andy and I are planning be there Friday morning.
Who else and maybe what time, I'm thinking I could be there 9:30 -10ish.
Looking for riders, BP, GMJohn, let's talk?
With all those vintage cars, there must be some good parts there.
Not sure what I need, but I'll know it when I see it.
Re: Canfield Swap Meet
Posted: Tue Jul 12, 2022 5:35 am
by GMJohnny
I’d love to go and am supposed to be off work both Thursday and Friday this week.
There’s also a coworker that’s dealing with a family issue and I might have to cover
her slot. I’d put me at 75% yes to go. I’ll know better Thursday.
GM
Re: Canfield Swap Meet
Posted: Tue Jul 12, 2022 7:15 am
by Basement Paul
Unless something stupid comes up, I think I'll go too.
-BP
Re: Canfield Swap Meet
Posted: Tue Jul 12, 2022 10:32 am
by Fred32v
Friday looks like the best day when I look at the weather.
Re: Canfield Swap Meet
Posted: Thu Jul 14, 2022 9:24 pm
by TireSmoker
I'll be there.. making up a list
G body steering column, turn signal related pieces, driver's side mirror (prefer bullet style)
(2) Ford pattern wheels/tires
Trans Cooler, Kooler Flush chemical
'90 Vette passenger side trim piece, A/C Controls, Gauge Panel, Power Brake Booster
Dwell Meter
Zip Ties, small and various colors
Pro Comp Ultra Lite GM Fuel, Vac/Boost Gauge
Re: Canfield Swap Meet
Posted: Fri Jul 15, 2022 11:00 pm
by TireSmoker
Well, I scored a brand-new-in-box dwell meter for $5. As a bonus, it's made by the Kal-Equip Company, Cleveland OH.
I also picked a decent trans cooler with -6 AN fittings for a cool $10.
I found some expired, purple seat belts (5-point race harness) for $10. Not 15 minutes later, we found a much more aesthetically pleasing set of black belts that are much newer for $20.
I got a couple baffled valve cover grommets for $2/each.
Got an assortment of zip ties for $10.
I got a Vortec complete distributor, which I use for the cam sensor on my Megasquirt setups, for $5. It's a plastic body! If the sensor is good, it's worth it.
And I got a few different interior pieces for my Chevelle -- the under-steering-wheel panel for $5, and a couple of the vent doors and 4 cable pulls for another $10.
All in all, a very successful trip. I'm stoked to try the dwell meter on the 63 Corvette.
-Dave