Well the old six in my convertible Rambler rattles like a worn out singer sewing machine. Pretty soon I have to do something.
It's been quite a while since I had a block bored and have heard enough horror stories about various shops the question is WHERE DO I GO?
Do I really need to haul my "stock" six all the over to Gellner to get a simple bore job ?
One guy I know reccomended Hasek (I didn't even know they bored blocks) but I've not heard anyone ever going there - but my buddy highly reccomended them - apparently they are alot bigger than I ever knew.
So .....What say you? Good stories or bad - please share.
Call me crazy, but I only wanna do this ONCE !
Racin'Jacin
P.S. BTW I only want a Boil & Bore job - I have NO INTEREST in having this assembled by anyone else. I don't trust anyone I could AFFORD!!!!
NE OHIO - where to get my block bored??
Moderators: MostMint, wxo, Fred32v, Basement Paul, ttamrettus
- Racin'Jacin
- Posts: 354
- Joined: Tue Oct 28, 2008 11:01 pm
Gardner Competition Engines
I've had Jeff Gardner do work for me, I've always been more than satisfied.
He has the facilities to do what you are asking for and much more.
He has an old web site, Gardner.competition.com but I don't think he responsed to emails.
I'd call for a quote (440) 635-0495. His shop is at the southwest corner of 608 & 322, behind Rick's Garage.
He has the facilities to do what you are asking for and much more.
He has an old web site, Gardner.competition.com but I don't think he responsed to emails.
I'd call for a quote (440) 635-0495. His shop is at the southwest corner of 608 & 322, behind Rick's Garage.
Fred32v
GMC Canyon Crew Cab Short Box 4x4 V6!
GMC Canyon Crew Cab Short Box 4x4 V6!
- Racin'Jacin
- Posts: 354
- Joined: Tue Oct 28, 2008 11:01 pm
bore job
I know of Gardner ...
Any other suggestions????
Thanks!!
Racin'Jacin
Any other suggestions????
Thanks!!
Racin'Jacin
- Basement Paul
- Posts: 3394
- Joined: Sun Jul 17, 2005 9:27 pm
- Location: In the dirt.
Michael's Racing Engines
Michael's Racing Engines in Macedonia did the boring, decking, etc. on the motor that is in BP's Firebird.
But that was a million years ago. Michael's does have a web site.
But that was a million years ago. Michael's does have a web site.
Fred32v
GMC Canyon Crew Cab Short Box 4x4 V6!
GMC Canyon Crew Cab Short Box 4x4 V6!
- Racin'Jacin
- Posts: 354
- Joined: Tue Oct 28, 2008 11:01 pm
bore job
Hmnnn, Michael's I completely forgot about those guys!!!!
Thanks there's another one for my list!
Thanks!
Racin'Jacin
Thanks there's another one for my list!
Thanks!
Racin'Jacin
- Racin'Jacin
- Posts: 354
- Joined: Tue Oct 28, 2008 11:01 pm
bore job
A fella we know had him build a SBC race motor last winter. First time out he bent the valves. Found out they forgot to install the inner springs (roller cam - no need for light break-in springs).Basement Paul wrote:Here's the thing with Gardner: he does good work, just make sure you get a price from him BEFORE he does the work. He surprised me with a pretty big bill on the Caddy heads when he was done.
-BP
"he" fixed it and sent a bill.
Buddy takes it out again - bends the valves again.
"he" fixed it and sent a bill.
This went on ALL SEASON. Each time it was fixed they handed him a BILL.
In the end it was determined (by the builder) that the brand new aluminum heads (suggested for use by the builder) were the problem.
This guy had him build a "race" motor. He was paid in full - I realize that there are no guarantee's with this sort of thing, but several of the "problems" during this chinese firedrill were misassembled parts - still EACH TIME a BILL was handed over! We're not talking about some exotic motor here - it's a SBC for gosh sakes!!!! Long story short - about 2k was dumped into a brand new set of heads and nary an eye was blinked.
Definitely NOT the kind of engine builder I am interested in dealing with.
He dumped more into those heads for repairs than I have in my whole digger motor!!!! YIKES!!!
I'm sure every engine builder has one get away from him now and again, but it's how you deal with the customer AFTERWARDS that sometimes says more than how you got there in the first place.
Racin'Jacin
- TireSmoker
- Site Admin
- Posts: 2447
- Joined: Sun Jul 17, 2005 1:45 pm
- Location: roaming the Matrix
- Contact:
I''ll second Michael's Racing Engines. That's where I've had all my work done. I've never had any problems with the parts I've had done there. Same as Fred, he's bored a few blocks and balanced my rotating assembly. Never had any assembly work done there, but I wouldn't hesitate having him do it.
-Dave
-Dave